Specifications
Preshape circuit.
7-band classic Graphic Equalizer.
Compressor with self-adjusting program dependant Attack/Release times.
Series effects loop.
Output Mute switch, active on all outputs except Tuner Out.
Electronically balanced XLR DI outputs for Pre and Post Preamp.
MOSFET technology 200 Watts output stage.
15” (382mm) special design Celestion speaker.
High frequency horn with variable attenuation.
Footswitch allowing control of Preshape, Graphic EQ, Compressor and Output Mute.
Cabinet tuned, with bottom unobstructed slot, to 42Hz.
Lightweight poplar plywood construction.
Original classy black ‘pimple’ covered.
Metal handles and protective corners.
Dimensions (HxWxD): 24.5'' (622mm) x 19.3'' (491mm) x 13.2'' (335mm)
Weight: 64.6lbs (28kg)

Call the store or Email Tom or Peter
for pricing.

Specifications
Preshape circuit
.7-band classic Graphic Equalizer.
Compressor with self-adjusting program dependant Attack/Release times.
Series effects loop.
Output Mute switch, active on all outputs except Tuner Out.
Electronically balanced XLR DI outputs for Pre and Post Preamp.
Additionnal speaker output (8 Ohms minimum load).
MOSFET technology 500 Watts (4 Ohms) output stage (with additionnal speaker cabinet).
15” (382mm) special design Celestion speaker.
High frequency horn with variable attenuation.
Footswitch allowing control of Preshape, Graphic EQ, Compressor and Output Mute.
Cabinet tuned, with bottom unobstructed slot, to 42Hz.
Lightweight poplar plywood construction.
Original classy black ‘pimple’ covered.
Metal handles and protective corners.
Dimensions (HxWxD): 24.5'' (622mm) x 24.2'' (615mm) x 13.2'' (335mm)
Weight: 79.2lbs (36kg)

Call the store or Email Tom or Peter
for pricing.

Specifications
Preshape circuit.
Valve drive circuit.
12-band classic Graphic Equalizer.
Dual-band Compressor with separate controls for each Hi and Lo bands.
Effects Loop with hi-pass/lo-pass/full range outputs, Left/Right/Mono returns, Series/Parallel switch and Level control.
Output Mute switch, active on all outputs except Tuner Out.
Electronically balanced XLR DI outputs for Pre Eq and Post Preamp Left & Right.
Left and Right Line Outputs.
Additionnal speaker output (8 Ohms minimum load).
MOSFET technology 500 Watts (4 Ohms) output stage (with additionnal speaker cabinet).
15” (382mm) special design Celestion speaker.
High frequency horn with variable attenuation.
Footswitch allowing control of Preshape, Valve drive, Graphic EQ, Compressor, Effects Loop and Output Mute.
Cabinet tuned, with bottom unobstructed slot, to 42Hz.
Lightweight poplar plywood construction.
Original classy black ‘pimple’ covered.
Metal handles and protective corners.
Dimensions (HxWxD): 24.5'' (622mm) x 24.2'' (615mm) x 13.2'' (335mm)
Weight: 82.5lbs (37.5kg)

Call the store or Email Tom or Peter
for pricing.

Specifications
800 Watts RMS, 8 Ohms.
Four 10” (254mm) special design Celestion speakers.
High frequency horn with variable attenuation.
Two Neutrik® Speakon® and two 1/4" (6.35mm) jack connectors.
Cabinet tuned, with central unobstructed slots, to 40Hz.
Lightweight poplar plywood construction.
Original classy black ‘pimple’ covered.
Metal handles and protective corners.
Dimensions (HxWxD): 26.9'' (682mm) x 24.2'' (615mm) x 17.1'' (435mm)
Weight: 76.3lbs (34.7kg)

Call the store or Email Tom or Peter
for pricing.